How to Close Your Pool in 9 Steps

how to close your pool

The dog days of summer may still be upon us, but it will be fall before you know it. Early September is still prime swimming time in Cincinnati, but soon your beloved pool will need to close for the winter season. Have you thought about how to close your pool?

Knowing when to close your pool can be tricky. Experts recommend closing your pool when the temperature outside consistently is 65 degrees Fahrenheit or below, and the water temperature consistently dips below 60 degrees. If you close your pool while it’s still warm out, you may be dealing with algae growth and green, unsanitary water come spring. With the unpredictable weather in Cincinnati, you may need to play it by ear to determine when to close your pool.

When the right time to close your pool does come, closing your pool for the season can be a challenge. There are several steps you need to take to make sure your pool doesn’t get damaged during the freezing cold conditions of winter. While we always recommend calling in the experts if you’re not a confident DIY-er, this guide will help you winterize and close your pool properly in 9 simple steps.

Step One: Clean the Pool

The first step before you start to close your pool is to clean it thoroughly. You’ve likely kept up with basic cleaning throughout the summer, but you should give your entire pool an extensive cleaning before closing it for the winter.

First, skim the surface of the pool with your skimmer net to remove leaves and other debris that may be floating on the surface of the water.

Next, brush the sides of the pool with a pool brush, making sure to scrub away any dirt or grime that has built up, especially at the water level. Pay extra attention to the stairs and ladder, or other areas with poor water circulation. 

You should also vacuum the bottom of the pool with a pool vacuum to remove any debris that has settled at the bottom of the pool. Make sure your water is as clean and clear as possible. Any missed debris can clog the filtration system over the winter season.

Finally, clean out your skimmer baskets of any debris. You may also want to wipe or hose out the skimmer baskets if they’re slimy or dirty.

Step Two: Test and Balance the Water

While you’ve been testing and balancing your water chemistry throughout the summer, you will need to thoroughly test and balance your water one last time before closing your pool. It’s imperative your pool has the proper chemical levels before you start the winterizing process to make sure your water stays sanitary while your pool isn’t in use.

Use a standard test kit and then add the proper chemicals to balance your water chemistry to your pool’s standard levels. Take special consideration of your chlorine levels before closing your pool. If your chlorine is higher than 5.0 ppm (parts per million.) If it’s too high, it might interfere with other chemicals used to winterize the pool and prevent them from working properly.

Step Three: Add Winterizing Chemicals

About a week before you intend to close your pool, you should add winterizing chemicals to your water to ensure that the water chemistry stays optimal throughout the winter. The chemicals needed can vary based on the type of pool you have, but at the very least you’ll need two chemicals:

  1. A phosphate remover or algaecide to prevent algae growth
  2. A stain and scale chemical to prevent mineral buildup

Step Four: Shock the Pool

The night before you close your pool, use a commercial pool shock to give it a final blast of cleaning power. Follow the manufacturer’s instructions and let the shock sit overnight while your pump runs to get the most benefit out of the chemicals.

Step Five: Reduce the Water Level

Before you put the cover on your pool or finish the other closing steps, make sure that you have an optimum water level for your pool cover type. If you have too much water in your pool over the winter, it can freeze and damage your skimmers or other parts of your pool.

The proper water level for your pool depends on the type of pool that you have and the cover that you’re using over the winter. In general, you want to keep the water level just below your skimmer or tile line, but no more than 18 inches from the top edge of the pool. Use a pool pump to

Step Six: Clean the Filter

Your pool’s filter can get dirty over the course of the summer, and you don’t want all the dirt and bacteria just sitting there all winter long. Before you close your pool for the season, turn off your pool pump and clean your filter thoroughly using your manufacturer’s instructions.

There are three types of pool filters: sand filters, cartridge filters, and diatomaceous earth (DE) filters. The cleaning process for each filter type may vary a bit, but in general, you’ll want to either backwash your filter or clean it with a hose and use cleaning chemicals if necessary to sanitize the filter before reinstalling it.

Step Seven: Empty the Pump Lines

It can get quite cold in Cincinnati over the winter, which means it’s imperative to empty your pool lines, pump, and filter of all water to properly winterize your pool. Water left in the lines over the winter can freeze, causing pipes to crack or burst and costing you money in damages.

This step is difficult, so it’s recommended to have a professional like Cincinnati Pool and Patio do this if you’re not confident enough to do it yourself. If you do want to attempt a DIY method, use an air compressor or shop vac to blow air through your system until everything is dry.

Step Eight: Remove All Pool Accessories

Before you cover up your pool and call it a day, remove all pool accessories from your pool so they don’t get damaged during the winter. Ladders and rails should be removed, as being exposed to winterizing chemicals for long periods of time can damage the finish on them. Dry them off thoroughly and store them in a clean, dry environment for the winter. Pool toys, slides, and other items should also be cleaned, dried, and stored away until next summer.

Step Nine: Cover the Pool

Finally, you will need to cover your pool for the winter and fasten it properly. The installation process of your pool cover will depend on the type of cover you use. Follow the manufacturer’s instructions, and make sure that the edges are sealed properly, so no dirt or debris can get into your pool over the course of the off-season.

Periodically clean off the top of your pool cover over the winter to keep it free of debris and snow using a soft broom or squeegee. Don’t use anything sharp, like a rake, to clean off your pool cover, or you risk puncturing the cover and ruining all your hard work of winterizing!

The Professionals with Cincinnati Pool and Patio can Help Close Your Pool

Closing your pool can be a lot of work but making sure it’s done properly will ensure that your pool opening in the spring will run smoothly. The experts at Cincinnati Pool and Patio can close or open your pool for you, so you know that it’s done right. Schedule your pool closing before our schedule books up for the fall or get in touch with us for questions about how to close your pool.

7 Easy Tips For Closing Your Pool This Fall

In Ground Pool Closed Tips

Closing Your Pool

With summer gone, it’s time for above ground pool owners to close down their pools. Winter brings frigid temperatures and ice can cause thousands of dollars of damage to pools that aren’t prepared correctly. That makes properly closing down your pool an essential part of pool maintenance. Here are our key steps to prepare you for closing your pool.

In-Ground Pools

The first task in prepping your pool for its winter nap is to make sure the water chemistry is correctly balanced to last through the winter without corroding or forming scale on the sides of your pool. This will also keep the thousands of gallons you have in your pool clean and ready to use next summer.

Next, cycle the water through the pump and filter for a few days until chlorine levels to return to normal. Then add winter algaecide.

On closing day, clean the pool one last time. Be sure to use a brush on the walls and the bottom to clear any leftover algae or silt. Drain water from the pump, filtering, and heating systems.

It’s a general practice to drain the pool below the mouth of the skimmer inlet. The idea is to keep water out of the filter and pumping system. While this sounds convenient, freezing may be an issue if you have tile at the waterline.

Above-Ground Pools

You’ll need to remove and store pumps and filters. Insert plugs into the pool filter water intake and outflow openings (usually in the pool’s sidewall). Disconnect all hoses from the pool and let it drain. Disconnect and drain all water heaters, filters, skimmers, automatic chlorinator, or salt chlorinator, and then store these in a warm, dry place like your basement.

Lastly, inflate and deploy the pool pillows and cover the pool. Be sure the cover is secure so that it won’t blow away and that there is enough support from the pillow underneath so that ice meltwater will drain easily from the cover. Otherwise, ice and meltwater can stretch and tear the cover and contaminate your pool water.

Closing down your pool may sound like daunting maintenance job, but it’s something that can be finished in the span of a week but a mistake could cost you thousands.

There’s a lot more to it than just slapping a cover on and calling it a day.

Let’s take a look at what you need to do to get your swimmin’ hole ready for its long winter’s rest.

1. Get the timing right

Closing your pool too early can encourage algae growth and make your job a whole lot harder when it’s time to reopen the following spring.

Make your life easier and enjoy your pool longer by waiting until late summer.

If your pool is heated, you can get away with waiting until October.

A good rule of thumb is to wait until the water is consistently lower than 65 degrees before closing.

Begin the process about a week before you actually want the pool to be closed.

2. Clean it up

Brush the sides and bottom of your pool and then vacuum it. A thorough cleaning before closing for the season will help to prevent algae growth and lighten your workload when it’s time to open it back up.

3. Test the waters

It’s best to take a sample of your pool’s water to a reputable pool store to have it tested.

You’ll want the pH to be between 7.4 and 7.6 and the alkalinity to be between 100 and 150 ppm.

Shoot for the top of these ranges when you’re closing your pool for the winter.

4. Add the chemicals

The winterizing chemicals you’ll add to your pool are:

  • A pH increaser and/or an alkalinity increaser.
  • Sanitizer, such as Chlorine or Bromine.
  • Chlorine shock.
  • Winter algaecide.

Keep in mind that the chlorine shock will destroy the algaecide.

The best course of action is to add the shock five to seven days before closing your pool, and then waiting to add the algaecide until right before you put the cover on.

5. What about the filter and pump?

Remove the drain plugs and allow the pump to drain. Remove the pump and all the hoses that are attached. If you have a chlorinator, that should be removed at this time as well.

If you keep all the drain plugs in the pump basket, you’ll know right where they are and you won’t risk them getting misplaced.

The hoses, pump, and chlorinator will last longer if you store them inside during the cold winter months.

No matter what type of filter you have, it will need to be removed and cleaned before storage. Filters should also be stored inside, with the exception of a sand filter, which may be too large and/or heavy to take indoors.

6. To drain or not to drain?

There is some debate about the validity of lowering the water level for the winter. This issue revolves around protecting the skimmer from cracking due to freezing temps.

For an above ground pool, removing the hose from the skimmer and using a winter skimmer cover plate will remove the need to drain the pool at all. The normal level will actually be better.

An inground pool is a bit different. Your best bet is to hire a professional to come and blow out the pipes. They can insert a rubber piece that will protect the skimmer from damage in the freezing cold. If this is done, you won’t need to drain the pool.

If you have tile on the sides of your pool, you should lower the water level to about 4 inches beneath the tile. This will prevent it from possible damage.

At this point in the process, it’s also the best time to remove ladders and any other accessories that can be stored.

7. Cover it up

An above-ground pool will need an air pillow beneath the cover.

You can use clips and cables to secure your cover.

An in-ground pool doesn’t require an air pillow but should use clips to secure the cover.

The long wait for spring

You’ve cleaned and scrubbed, added chemicals and covered up your pool.

Following these maintenance tips gives you the best chance of not having any unwelcome surprises come spring. Have any questions about closing your pool? Contact us here. 

Retaining Walls for Pool

retaining walls

Retaining Walls for Pool

Retaining walls are usually used for sloping backyards. Sometimes a wall is used to add more room by cutting into a small hillside. While other times its to allow perimeter space around the pool. Some homeowners incorporate a retaining wall into a water feature, such as wall spouts or rock waterfalls.

SLOPE

One of the biggest challenges that pool owners run into is the grade of their yard. Very rarely is someone’s backyard completely flat. If you have a sloped backyard, then you’ve probably considered incorporating a retaining wall into your design.

Sometimes with some extra gravel and some creative backfilling, we can get by without the extra expense of walls. Sometimes walls can add to the aesthetics of the pool when incorporated properly.

Determining when a wall is needed is the most important thing. This can become a disaster for the homeowner if the pool goes in and no wall was put in place to divert water. What this means is that the rainwater coming off the slope is going to end up in the pool carrying with it all the dirt and debris that comes along with a storm.

The slope is usually determined by how much dirt is left from the excavation of the pool. Sometimes the homeowner will have some extra fill dirt brought in to help feather the slope out.

RETAINING WALLS STYLE

There are two main styles of retaining walls, both with their method of construction. Masonry walls are built out of either poured concrete or concrete block and faced with stone.

Segmental retaining walls are constructed of dry stacking pre-cast concrete block together. Segmental block retaining walls are the most popular for several reasons, including being very attractive and more budget-friendly than masonry walls.

Sometimes when there is a slope in the yard that goes down to a level spot where the pool can go, it may be possible to put in a French drain to catch the water before it runs onto the patio. If you have to cut into the grade of the yard to put the pool in then this will probably not be an option for you.

LENGTH

One thing to keep in mind is that you do not sell yourself short on the length of the wall. When the wall is tapering down it is good to carry it a few feet longer then what is needed to ensure that water does not wash around the wall and onto the deck due to trying to save a couple of hundred dollars.

WALL FEATURES

When doing walls, you should try to make the wall more than just a wall. You can do an elevated patio which is always nice. Another option is to put the wall right on the pool itself with a cascade or two in it. It is always nice if the wall can be 20 fiberglass pool with retaining walls 24 inches so that the wall can be used to act as a sitting wall.

Not all walls are designed to keep the water from running onto the pool deck. Sometimes the wall is there to keep the pool in place. When dealing with these walls it is a little harder to incorporate them into the project to make it play a role in making the pool look better. A lot of times with the proper backfill and compaction a wall can be avoided in these situations.

Perhaps your property is level, but you want to add a dramatic backdrop to your pool with a raised wall on the far side. On top of the wall, you can add water features, a raised spa or additional pool deck spaces. Retaining walls can be topped with small bushes to add greenery and act as a barrier to blowing leaves. They can also serve a safety function by restricting access on one side of the pool.

There is usually extra cost in the gravel that is needed and the extra time in prepping the ground. But it can be much less expensive than the wall itself. The area would have to lend itself to enough area for grading the slope out so that it is not to steep.

COST

How much do retaining walls cost? This is a pretty broad question with a variety of answers depending on which options you choose. Retaining walls are typically priced by the square foot, so the length and height will directly influence how much you spend.

The cost of segmental walls is also determined by the size and shape of the block used. Walls with multiple sized blocks are typically more attractive.

Have any questions about retaining walls or the pool construction process? Contact us here!

How To Get Ready For National Pool Opening Day

national pool opening day

National Pool Opening Day

There is a national holiday for each date on the calendar and also for every subject under the sun, but National Pool Opening Day is a holiday we can all rally round.

Schedule Your Pool Opening Today

As a pool owner, you understand there’s a lot of things that go into opening your pool. National Pool Opening Day is an amazing reminder to prepare for the summer season!

Test the Water First

Once you peel the winter cap and realize the challenge before you, begin by assessing your pool chemical levels. A good water test kit is important for testing your pool’s chemical balance.

When stocking up for summertime on pool shock and pills, don’t forget to purchase water balance chemicals for pH, alk, and calcium. You might also need an algaecide to control algae. And a water clarifier to remove finer particles out of the water.

Pool equipment

Examine the pool gear, mainly the filter and pump, but also other pool equipment like pool valves, chlorinators, heaters, cleaners, skimmers, ladders, slides and diving boards.

Start looking for any soil, mulch, trees or nearby plants that may get in the way of your equipment. Pool equipment does better in a sunny, dry location and not buried in bushes.

Pool cleaners have wearable components, and generally, require more frequent repairs than other pool equipment. Inspect closely for the cleaner parts that contact the surface, or debris totes or hose components that are worn.

Pool filters, either sand, DE or cartridge will need the filter press replaced at a single point. Sand lasts about 5 decades, DE grids for ten decades, and filter capsules 2-3 years for a good-sized filter. You can prolong the life and improve filtration by using a Pool Filter Cleaner before and after opening your pool.

Pool pumps have electric motors that will fail at some point in time, usually at spring startup, or at the hottest aspect of the summer. When your motor will not turn or trips the breaker, it might be a loose cable, triggered GFCI or it might be an engine that is fried. Pumping problems may be air leaking to the pump, or a clogged impeller, or the water level.

Pool Accessories

Pool Ladders, Slides & Diving Boards possess a lot of bolts that need to be checked for tightness. Notably the step treads, which can loosen over time.

Chlorinators are normally easy to care for, but the chlorinator lid o-ring needs to be lubed often to protect the o-ring from the chlorine.

Pool Heaters

If you have a pool heater, the best spring maintenance you can do is clean out the base of the device to remove any leaves, cobwebs, and anthills. Make sure the air vents and drain holes aren’t blocked in the cabinet. If leaves have collected inside a heat pump, or in addition to a gasoline heater exchanger, remove the heater top to wash out them.

Above-Ground Pools

Above ground, pools will join the hoses or pipes from the wall skimmer to the pool filter and then to the pool pump, and back to the pool return. Open the filter air bleeder, open the lines to be flooded by the valves and fill the pump with water. After being sure that the return and suction valves are available plugs the pump into a grounded electrical socket, and the pool skimmer and wall return aren’t plugged.

Inground Pools

Inground pools equipment reassembly is a bit more complicated, but it begins the same way, by screwing the drain wires back to the pump, heater, filter. Together with the water level up, pool plugs can be pulled out of the skimmer and wall contributes to flooding the lines. Contrary to Above ground pools, inground pumps sit above the water level. Fill the pump with water from a hose or hose, and seal. Open the filter air bleeder, open the return and suction valves, and then turn on the pump. Start-Up with a multiport valve on the ‘Waste’ place is a fantastic way to flush out the skimmer and drain, and it has much less resistance too, great for pumps that have difficulty ‘grabbing prime’.

 

National Pool Opening Day is the last Saturday in April. Make it your annual tradition to join us in welcoming spring by opening your pool! In case the final Saturday is too soon to start your pool, then join in by cleaning off your pool cover and prepping it to open when it’s warm enough. If you open the pool in May, it is the ideal time to examine your pool water.

If you need help opening your pool, contact us today!

The Early Bird Tent Sale Extended

patio

We’ve extended your chance to grab the best deals of the season at Cincinnati Pool & Patio! 

Find 75% off all patio furniture, all clearance items, and scratch-n-dent items April 2nd through April 8th! 

EXTENDED EARLY BIRD TIPS

COMFORT

Comfort is important — very important. You may want steel or wood construction in your patio furniture for stability and longevity, but don’t forget that without some homey comforts like soft, plush cushions, your outdoor furniture will go largely unused. Avoid pancake cushions. You know, those thin, puny little cushions that aren’t plush or even very pliable. Opt for chubby cushions that feel light when you pick them up. Look for cushions with polyester filler, too. The more lightweight and springy the filler is, the more quickly it will dry out after exposure to moisture. That means it will resist mold and mildew and stay comfortable and sweet-smelling longer.

TEXTILES

You can’t grab a pillow from your family room and expect it to adapt to life outside on the patio. Most textiles designed for indoor/outdoor use are made from all-weather materials that repel water or encourage moisture to evaporate quickly by remaining porous.

Fabrics designed for use outdoors are usually fade resistant and UV protected, too. They’ll look good and feel soft and comfortable for at least a couple of seasons. When you’re evaluating fabrics for outdoor furniture, check cushion seams for heavy-duty thread and consistent, even stitches. Choose cushions with vents that encourage airflow and quick drying.

Invest in furniture with cushions that can be unzipped and taken apart for periodic airing, repair or replacement. It’s also a good idea to buy outdoor furniture outfitted with cushions you can turn and flip. This will help them retain their shape, dry more quickly and fade evenly. Acrylics, polyester, treated canvas, and the cotton duck is all comfortable, durable fabrics used in the construction of outdoor furnishings. Look for them in upholstered items, cushions, pillows, curtains, blinds and umbrellas.

CONVENIENCE AND QUALITY

From sloppy welds to cracked casters to amateurish paint finishes, a close inspection will expose that great outdoor furniture bargain for what it is — a bad buy that probably won’t last until next season. There are a couple of important lessons here: It’s easy to think of outdoor furnishings as somewhat less important than the stuff you buy for indoor use. The reverse is often true. What you buy to use outside has to stand up to sun exposure, wind, rain and probably some roughhousing, too. Inspect every piece you’re considering for flaws, especially if the deal sounds too good to be true. This is one area where a higher price is often a good indicator of better quality.

Check out our list of patio furniture here! 

If you have any questions about patio furniture or the sale, contact us here!

Chemical Brands You Can Trust

chemical brands

As a pool owner, there are too many chemical brands for you to research, buy, test, and use for you to know which ones are the best for your pool.

That’s why we’ve assembled a list of our favorite pool and spa chemicals to help make your pool maintenance a little easier this pool season.

Chemical Brands

Baquacil

With premium Baquacil pool care products, you can achieve the clarity your pool was designed for. Their chemicals do away with tedious pool care. By enabling you to convert your pool into a chlorine-free, carefree sanctuary in less than 24 hours. The result? Clear, beautiful water that’s gentle on eyes, hair, and skin, not to mention pool surfaces and swimsuits.

The real advantage of the Baquacil brand is the peace of mind all of our products offer thanks to the brand’s dependable, consistent bacteria control. And less time worrying about bacteria means more time to enjoy fun in the water with your family.

Poolife

Leave the complicated decision making at the office and escape to your backyard. Poolife Pool Care Systems include the products you need to have a clean pool all summer long. Your professional Poolife dealer will help you select the system that’s best for your pool and your lifestyle.

Rendezvous Spa

From sanitizers and balancers to algaecides, the Rendézvous Spa Specialties line of products offers everything you need to keep your spa clean and inviting. Designed with you in mind, Rendézvous Spa Specialties features color categorization for quick and easy product identification. This high quality, easy-to-use products that will help take the hassle out of maintaining a spa so you can truly enjoy your investment.

Have any questions about chemicals brands? Contact us here!

pHin and Your Pool

pHin and Your Pool

As a pool owner, it’s difficult to give your pool’s chemical all the attention they need. All of your problems can be solved. The pHin is a blue-tooth enabled machine that constantly monitors the chemicals in your pool and will alert you when they change.

Everything Works Together to Keep Your Water Healthy & Safe!

1. Monitor with the pHin

The pHin monitors your water continuously. Therefore, it knows what the levels of your pool should be.

You’re able to track it through the helpful app while the device live updates any changes there may be.

The days of using testing strips are over!

2. Be Notified

The app alerts you when your water needs attention. Then, you’re sent a notification straight to your phone.

Additionally, the pHin will notify you ASAP when your levels are changing and when you should add more chemicals. You’ll be able to add them to your levels turn your pool water turns unsatisfactory.

3. Add Chemicals

Follow the simple instructions to add chemicals and balance your water. The device breaks down exactly what your pool needs and how much you need to add.

Finally, if you have any question about what chemicals or brands to buy, you can always give us a call.

4. Get Swimming

Keep your pool safe and ready for your family this summer. With the help of pHin, you’ll never have to worry about your pool balance again.

Do you have any questions about the device or your pool’s chemical balance? Contact us here!

The Benefits of an In-Ground Pool

in-ground pool

The Benefits of an In-Ground Pool

Whether your backyard is a clean slate waiting to be turned into an in-ground pool paradise, from in-ground pools to water features, decking and lighting, living spaces and landscape, the choices may seem endless. Therefore, consider these important design elements before creating your masterpiece.

The In-ground Pool

A pool makes a definite statement and, depending on the added touches, begins to set the tone. Additionally, consider a vinyl lining for the following reasons:

Easy installation makes it one of the lowest initial costs of all types of pools. Plus, the material is durable, smooth and inhibits the growth of algae.

The Lighting

Lighting offers both beauty and safety, and it is a vital element in setting your tone. Likewise, from underwater hues to subtle illuminations along walkways and lights filtering through trees and waterfalls, the possibilities are endless.

Water Features

This is the pièce de résistance–the crowning glory. From waterfalls to grottos to diving rocks or unique and inventive slides, this is the place where your imagination soars.

Finally, we are recognized as the leaders in our market for innovation and the use of the latest green technologies and, in the process, save you thousands of dollars in wasted water and energy. Contact us and we will help you create your vision.

3 Chemicals You Need To Open Your Pool

chemicals

3 Chemicals You Need To Open Your Pool

Pool season is almost here and as every pool owner knows, it’s better to be prepared than not. Most people will want to automatically start adding in adjustment chemicals, but this is a mistake.

The best and easiest way to open your pool is to start with a clean and fresh base. Here are the chemicals we recommend using before you open your pool.

Stain and Scale Chemicals

This chemical will prevent scale, rust, and other stains from appearing in your pool. This is a great prep to make sure your pool is clean right from the start.

Algaecide

Algaecide will help remove most of the oxygen from the water, to prevent any algae or other organic material from growing. The mixture should also kill any algae that are already currently in your pool from the winter season.

Chlorine

Last, but not least, you need to add chlorine. To open your pool, you’ll want to add double the amount of chemicals that you would do for a regular shock.

Doubling them will help kill any bacteria, algae, and anything else that was growing over the winter.

Next Steps

Your pool isn’t swim-ready yet, especially after you had just added all of these chemicals.

Give your pool at least 48hrs before you test the water again. Bring your sample to the pool experts, and we can help you decide what you need for your pool.

Contact us here or visit us at our Evendale location.

How To Prepare For Your New Pool

pool opening

How To Prepare For Your Pool

Have you been dreaming about constructing your new pool but never had the time to make it happen? Now is the perfect time to start planning!

Here are a few questions you need to start thinking about to enjoy your backyard oasis!

What can I afford?

As with any large purchase or project, it is always a good idea to have a budget in mind. There are many components to include in your budget preparations – installation, decking, landscaping. Having a roundabout number in mind is a great step to take before visiting a dealer to get the process started.

How often will I use this pool?

Determining how you will use your pool can help determine what size you need, what special features you may want to add, and the overall feel of your space. Will you be using it mainly with your significant other, or will you frequently have family members and friends over for parties and get-togethers? Do you plan to play games, or is it simply for rest? These are easy things to think about to ensure that you have exactly what you want in your backyard space.

Do you have any questions about options, sizing, or if being a pool owner is right for you? Don’t hesitate to contact us here!